Stainless steel/Cast iron End Suction Pump——AE/SE/SEA/SEH

.Sprinkler irrigation, irrigation, drainage

. Water supply

. Fire-fighting systems

. Heating or cooling water

. Air-conditioning systems

. Painting industry

. Swimming pool water

. Water treatment in metallurgical industry

. Sewage water disposal

. Brackish water

.Suction Flange Size: DN50-DN450

.Discharge Flange Size: DN32-DN400

.Capacity Q Range: 3m³/h - 2200m³/h

.Head H Range: 5m - 250m

.Working Temperature Range: -10℃ to +90℃, to 110°C (optional)

.Operating Pressure: 10bar (standard) or 16bar (standard), 25bar (optional)

. High salinity water / Seawater desalination

. Pure Water Treatment for Boilers in Power Plants

. Pure Water and Ultra Pure Water Treatment in Electronic Industry

. RO Reverse Osmosis System

. Biopharmaceutical Industry and Food Industry

. Painting industry

. Liquid transportation in chemical industry

. Water treatment in metallurgical industry

. Sewage water disposal

. Hot Springs and Seawater Swimming Pools

.Suction Flange Size: DN50-DN450

.Discharge Flange Size: DN32-DN400

.Capacity Q Range: 3m³/h - 2200m³/h

.Head H Range: 5m - 250m

.Working Temperature Range: -10℃ to +90℃, up to 150°C (optional)

.Operating Pressure: 10bar (standard) or 16bar (standard), 42bar (optional)

. Petroleum and petrochemical industry

. Pulp and papermaking

. Chemical Technology

. Sewage water disposal

. Viscous liquids (up to 300 cSt)

. Pulp (up to 6%) and Slurry (up to 15% concentration)

. Clean or slightly contaminated liquids

.Suction Flange Size: DN50-DN450

.Discharge Flange Size: DN32-DN400

.Capacity Q Range: 3m³/h - 2200m³/h

.Head H Range: 5m - 250m

.Working Temperature Range: -10℃ to +90℃, up to 250°C (optional)

.Operating Pressure: 16bar (standard), 100bar (optional)

. Pressurization process for desalination of high salt 

water and seawater and energy recovery process

. High pressure film supercharging system for zero 

discharge water treatment process

. Boiler condensate water circulation

. Other clean fluids at high temperature or high pressure

.Suction Flange Size: DN50-DN450

.Discharge Flange Size: DN32-DN400

.Capacity Q Range: 3m³/h - 2200m³/h

.Head H Range: 5m - 250m

.Working Temperature Range: -10℃ to +90℃, up to 250°C (optional)

.Operating Pressure: 16bar (standard), 100bar (optional)

.Casing: Horizontal volute casing pump, single-stage with bearing housing, in back pull-out design, and pump body with high head is designed with double volutes

.Impeller: Closed type, excellent hydraulic model ensures high hydraulic efficiency, and precision casting make efficient and energy-saving operation, if necessary, the inducer be used to improve the necessary cavitation margin

.Shaft: Enhanced shaft designed, under the maximum load, ensure the deflection within the standard range to ensure the good operation of the shaft components, more stable operation of the pump, longer life of bearings and mechanical seal, reduce maintenance and maintenance costs

.Shaft seal: Single mechanical / Cartridge type / Double mech. seal / Tandem mech. Seal

.Bearing housing: Heavy load design and large capacity oil chamber are adopted to ensure long-term reliable operation of bearings. Maintenance-free sealed grease lubrication, or grease lubrication, or oil lubrication can be configured

.Coupling: Flexible coupling with/without spacer sleeve;

.Contact Guard: Coupling guard as per EN 294

.Baseplate: Sectional steel / folded steel plate, fabricated sectional steel for the complete unit (pump and motor) in torsion-resistant design.

.Spare parts: Modular design, high degree of generalization, reduce spare parts inventory

.Wet parts: Special alloy material configuration to meet the transport of various special medium

.Pump Flange: ISO / ANSI /DIN / JIS

.Casing: Horizontal volute casing pump, single-stage with bearing housing, in back pull-out design, and pump body with high head is designed with double volutes 

.Impeller: Closed type, excellent hydraulic model ensures high hydraulic efficiency, and precision casting make efficient and energy-saving operation, if necessary, the inducer be used to improve the necessary cavitation margin 

.Shaft: Enhanced shaft designed, under the maximum load, ensure the deflection within the standard range to ensure the good operation of the shaft components, more stable operation of the pump, longer life of bearings and mechanical seal, reduce maintenance and maintenance costs 

.Shaft seal: Single mechanical / Cartridge type / Double mech. seal / Tandem mech. Seal 

.Bearing housing: Heavy load design and large capacity oil chamber are adopted to ensure long-term reliable operation of bearings. Maintenance-free sealed grease lubrication, or grease lubrication, or oil lubrication can be configured 

.Coupling: Flexible coupling with/without spacer sleeve; 

.Contact Guard: Coupling guard as per EN 294 

.Baseplate: Sectional steel / folded steel plate, fabricated sectional steel for the complete unit (pump and motor) in torsion-resistant design 

.Spare parts: Modular design, high degree of generalization, reduce spare parts inventory 

.Wet parts: Special alloy material configuration to meet the transport of various special medium 

.Pump Flange: ISO / ANSI /DIN / JIS

.Casing: Horizontal volute casing pump, single-stage with bearing housing, in back pull-out design is easy to maintain without affecting the pipeline, central outlet design is easy to pump self-exhaust, foot support is uniform and effective to disperse pipeline pressure

.Corrosion allowance: The pressure casing be designed with a minimum corrosion allowable be 3 mm

.Impeller: SEMI-OPEN impeller with back blade design is used to reduce the seal chamber pressure and axial thrust, excellent hydraulic model ensures high hydraulic efficiency, and precision casting make efficient and energy-saving operation, if necessary, the inducer be used to improve the necessary cavitation margin

.Shaft: Enhanced shaft designed, under the maximum load, ensure the deflection within the standard range to ensure the good operation of the shaft components, more stable operation of the pump, longer life of bearings and mechanical seal, reduce maintenance and maintenance costs

.Shaft seal: Single mechanical / Cartridge type / Double mech.seal / Tandem mech.seal; 

.Bearing housing: Heavy load design and large capacity oil chamber are adopted to ensure long-term reliable operation of bearings. Maintenance-free sealed grease lubrication, or grease lubrication, or oil lubrication can be configured

.Running clearance: The special bearing box design adjusts the clearance between impeller and casing by adjusting bolts of the bearing sleeve, so that the pump can run efficiently throughout its life

.Oil seal: Lip seal, or special magnetic bearing separator can effectively prevent oil leakage and dust (optional)

.Bearing housing: Heavy load design and large capacity oil chamber are adopted to ensure long-term reliable operation of bearings. Maintenance-free sealed grease lubrication, or grease lubrication, or oil lubrication can be configured

.Coupling: Flexible coupling with/without spacer sleeve; 

.Contact Guard: Coupling guard as per EN 294; 

.Base plate: Sectional steel / folded steel plate, fabricated sectional steel for the complete unit (pump and motor) in torsion-resistant design

.Spare parts: Modular design, high degree of generalization, reduce spare parts inventory

.Wet parts: Special alloy material configuration to meet the transport of various special medium

.Pump Flange: ISO / ANSI /DIN / JIS

.Casing: Centreline-mounted, single-stage overhung, designated pump API610 type OH2. with a single bearing housing to absorb all forces imposed upon the pump shaft and maintain rotor position during operation

In back pull-out design is easy to maintain without affecting the pipeline, central outlet design is easy to pump self-exhaust

.Corrosion allowance: The pressure casing be designed with a minimum corrosion allowable be 3 mm 

.Impeller: Closed type, excellent hydraulic model ensures high hydraulic efficiency, and precision casting make efficient and energy-saving operation, if necessary, the inducer be used to improve the necessary cavitation margin

.Shaft: Enhanced shaft designed, under the maximum load, ensure the deflection within the standard range to ensure the good operation of the shaft components, more stable operation of the pump, longer life of bearings and mechanical seal, reduce maintenance and maintenance costs

.Shaft seal: Cartridge type / Double mech.seal / Tandem mech.seal

.Bearing housing: Heavy load design and large capacity oil chamber are adopted to ensure long-term reliable operation of bearings. Maintenance-free sealed grease lubrication, or grease lubrication, or oil lubrication can be configured

.Oil seal: Lip seal, or special magnetic bearing separator can effectively prevent oil leakage and dust (optional)

.Coupling: Flexible coupling with/without spacer sleeve

.Contact Guard: Coupling guard as per EN 294 

.Base plate: Sectional steel / folded steel plate, fabricated sectional steel for the complete unit (pump and motor) in torsion-resistant design

.Spare parts: Modular design, high degree of generalization, reduce spare parts inventory

.Wet parts: Special alloy material configuration to meet the transport of various special medium

.Pump Flange: ISO / ANSI /DIN / JIS